Usare un ASUS 636 con OziExplorerCE

Configuring the Asus 632 / 636.
OziExplorerCE will run on the Asus 632 and Asus 636. Configuring OziExplorerCE - using the menu options File / Configuration / NMEA (GPS) Select the Communication Port port from the drop down list. The drop-down list shows the actual ports which the PDA has installed and a description of each port is shown. Communication Port - COM 5 should be the port to use Baud Rate - set to 4800 Sentence - GPRMC GPS NMEA Output Datum - WGS84 Use Check Sum - set to ON (ticked) Check Valid - can be set either way but be aware of the difference of operation you can expect. If ON - the Valid flag in the sentence from the GPS will be checked and if the GPS indicates that it does not have a valid fix, OziExplorerCE will NOT process the sentence. If OFF - the sentence will be processed, although the GPS may not have a valid fix. Note - The Asus models do not output position data on any of the external ports therefore it is not possible to connect the them to a PC and use it for moving map (real time tracking). Configuring the Asus 636 for several programs to run at the same time. Windows Mobile 5 has the option to configure the system so that two programs can receive the sentences from the GPS at the same time. Click "Start" / "Settings" / "System Tab". On the System page click "GPS". Configure the following - On the GPS Settings "Programs" tab, set the "GPS program port" to COM9. On the GPS Settings "Hardware" tab, set the "GPS hardware port" to COM5 and "Baud rate" to 4800. On the GPS Settings "Access" tab, tick "Manage GPS Automatically" Click "ok" All programs must be configured to use COM9 as the GPS communication port. All other OziExplorerCE settings will as shown above.